Pack Includes: BAFG1X12P, UD12D2, QR600.1, AMPKIT4

Cadence UD12D2 12” 2 ohm Ultra Drive Car Audio Subwoofer 900 watts

• Size: 12 in.
• RMS/MAX Power: 450W / 900W
• Recommended Power Range: 100 to 450 watts
• Cold Rolled Steel Basket
• Cast Aluminum Magnet Heat Sink
• Frequency Response: 28Hz – 500Hz
• SPL at 1W / 1m: 93 dB
• Mounting Depth: 6.18 in.
• Voice Coil: 2 in. BAESIV

These subwoofers have been designed with a Great Bang for The Buck approach. Giving high performance, rigid construction and peace of mind that it will last. We have options to meet 450 – 1000 watts of Max Power handling and sizes in 8" 10" and 12" They feature a robust suspension with Santoprene Rubber roll surround and long-lasting CONEX spider. Let’s not forget the motor structure with its integrated heat sink to help dissipate heat from the magnet. All of these to lower distortion and keep everything moving in a linear motion all while keeping your vibe alive.

1 X 12 PORTED To Suit FORD BA-FG SEDAN

FORD BA-FG SEDAN 1 X 12 PORTED

Cadence QR600.1 Class D Mono Amplifier 600 X 1 @ 1 ohm

• Channel / class: Mono / D
• RMS power at 1 ohm-14.4V: 600W x 1
• RMS power at 2 ohm-14.4V: 400W x 1
• RMS power at 4 ohm-14.4V: 250W x 1
• Fuse rating: 35A x 2
• Dimensions (inch): 10.63(w) x 2.05(h) x 6.3(d)
  (mm): 270(w) x 52(h) x 160(d)
• Unit weight: 4.5 lbs

The QR Series amplifiers can produce their rated power with an efficiency of more than 80%! These Full Range Class D amplifiers will take it easy on your vehicles charging system while still rocking out to the max. Worry free defensive circuits which detect Short Circuit, Low Battery Voltage, Over Current and Thermal Protection which rollback power from damaging circumstances. The QR Series have a small footprint for easy installation in tight spaces, and include a robust assortment of crossover adjustments to meet many types of installs and includes a Remote Level Control (1CH, 3CH, and 5CH) for adjusting the intensity of your bass.

Cadence Acoustics AMPKIT4 Power Amplifier Kit Wires

The Amp Kit 4 is a four gauge professional amplifier installation kit. It includes: One set of 17' translucent orange, twisted pair, double shielded, 100% OFC audiophile RCA cables; 18' 4 gauge, high current, low impedance, translucent orange power cable with woven nylon mesh; 3' 4 gauge, high current, low impedance, translucent ground cable; A mini ANL distribution block with a 150 amp fuse; 30' 16 gauge translucent orange/silver heavy-duty speaker wire; 17' remote turn-on wire; Ten 8" black cable ties; Four 4 gauge 5/16" ring terminals; Two 4 gauge 1/4" spade terminals; Five 14-16 gauge #10 spade terminals; Five 14-1 gauge butt connectors; One 4 gauge snap, plastic, black firewall grommet; Two #10 1/2" self tapping pan head screws; and Two ground washers. Cadence Acoustics warrants this product to be free from manufacturing defects regardless of how long you own it. This warranty is limited to the replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This warranty is in lieu of all other warranties express or implied.