Cadence Subwoofers with Fibreglass Dual 10inch Sub Box To Suit Ford Ranger & Mazda BT50 2012+

*Please be mindful, all orders are getting processed asap. But in some cases, it may take 2 weeks to manufacture, shipping out after this point*

Pack Includes: RANGERDUAL10, 2 x SLW10S4, Q1001D, AMPKIT4

Cadence SLW10S4 10” 4 Ohms SL Slim Car Audio Subwoofer 500 Watt

• Size: 10 in.
• RMS/MAX Power: 250W / 500W
• Frequency Response: 36 Hz – 500 kHz
• SPL at 1W / 1m: 86 dB
• Mounting Depth: 3.66 in.
• Voice Coil: 2 in.

SL Subwoofers have impressive output and sound quality over the previous S5 Subwoofers. The performance is achieved by revising both suspension, and motor structure which result in longer linear excursion and lower distortion with improved durability. Suspension: The surround is a rugged tall half roll surround that will support long linear excursion with improved reliability. The high flex life Conex spider/damper has been revised in roll shape and material to compliment the improved surround. Motor Structure: The motor structure was engineered using FEA analysis to provide low distortion output at both high and low power levels. This results in more linear motor force within the subwoofers normal operating excursion and power levels for both negative and positive current through the voice coil.

Cadence Q10001D Class D Mono Amplifier 1000W X 1 @ 1 ohm

• Channel / class: Mono / D
• RMS power at 1 ohm-14.4V: 1000W x 1
• RMS power at 2 ohm-14.4V: 600W x 1
• RMS power at 4 ohm-14.4V: 350W x 1
• Fuse rating: 35A x 3
• Dimensions (inch): 14.65(w) x 2.05(h) x 7.1(d)
  (mm): 372(w) x 52(h) x 180(d)
• Unit weight: 6.2 lbs

The Cadence Q10001D amplifier takes you to a new standard for both novice and experienced audio aficionado, with full feature set, state-of-art electronics and > 80% efficiency on Class D Mono blocks, our new circuit design dramatically improves both output power and sound.

subwoofer fibreglass Dual 10inch sub box To Suit Ford Ranger & Mazda BT50 2012+

The ultimate subwoofer solution for your Ranger or BT50!
This fibreglass box is molded to fit behind the back seat. The factory carpet must be removed as the back of the box is contoured out of thick fiberglass to the exact shape of the metal. As the box is very slim only two shallow 10inch subwoofers up to 90mm mounting depth can fit.
This setup is compatible with the stock or aftermarket headunits. You just need an amplifier with speaker level inputs to listen into the sound going to the existing speakers.

Cadence Acoustics AMPKIT4 Power Amplifier Kit Wires

The Amp Kit 4 is a four gauge professional amplifier installation kit. It includes: One set of 17' translucent orange, twisted pair, double shielded, 100% OFC audiophile RCA cables; 18' 4 gauge, high current, low impedance, translucent orange power cable with woven nylon mesh; 3' 4 gauge, high current, low impedance, translucent ground cable; A mini ANL distribution block with a 150 amp fuse; 30' 16 gauge translucent orange/silver heavy-duty speaker wire; 17' remote turn-on wire; Ten 8" black cable ties; Four 4 gauge 5/16" ring terminals; Two 4 gauge 1/4" spade terminals; Five 14-16 gauge #10 spade terminals; Five 14-1 gauge butt connectors; One 4 gauge snap, plastic, black firewall grommet; Two #10 1/2" self tapping pan head screws; and Two ground washers. Cadence Acoustics warrants this product to be free from manufacturing defects regardless of how long you own it. This warranty is limited to the replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This warranty is in lieu of all other warranties express or implied. 

• 17' Translucent Twisted Pair, Double Shielded 100% OFC Audiophile RCA Cable. 18' 4 Gauge High Current, Low Impedance, Translucent Orange Power Cable. 3' 4 Gauge High Current, Low Impedance Translucent Ground Cable
• 30' 16 Gauge Translucent Orange/Silver Heavy-Duty Speaker Wire. 17' Remote Turn-On Wire. Mini ANL Distribution Block with 150A Fuse
• 10pc 8" Black Cable Ties. 2pc 4 Gauge 5/16" Ring Terminals. 2pc 4 Gauge 1/4" Spade Terminals
• 5pc 14-16 Gauge #10 Spade Terminals | 5pc 14-16 Gauge Butt Terminals | 1pc 4 Gauge Snap Plastic Black Firewall Grommet | 2pc #10 1/2" Self Tapping Pan Head Screws | 2pc Ground Washers
• Cadence Decorative Name Plate and 6' Split Loom Tubing NOT Included