Car Builders Peel & Stick Heat Shield Heavy Face 0.25mm Aluminium 600mm x 1.6m

Car Builders Peel & Stick Heat Shield pressure-sensitive adhesive makes these heat shields easy and versatile to install, particularly in tight spaces. It is widely used as a thermal barrier in many industries and works effectively to block heat around fuel tanks/systems, tunnel shields, floor pans, exhaust systems, body shields, transmissions, and fluid lines and to protect non ferrous materials.

Constructed from needle-punched fiberglass with a polyester core and durable aluminum face that comes in two thicknesses. The product has been oven test for 30 hours with no failure at 475ºF (246ºC)

Lite is easy to form. As the top aluminum lay is thinner (0.05mm), this product suits applications where greater versatility is required on irregular surfaces such as under bonnet, motorcycle fairings, inner guards, air boxes, batteries, etc

Peel & Stick Heat Shield Heavy (0.25mm aluminum thickness) is best used for applications over flatter surfaces or near exhaust systems and heat elements use. It is also recommended for road-facing applications as it has greater puncture resistance.

Pros- Direct apply to the surface being protected, ideal for tight spaces. Can be applied to plastic surfaces e.g. fuel tanks. Available in two aluminum thicknesses.

Features/Advantages:

• Light Weight
• Easily formed into place
• Very effective in limited space
• Approved at several major OEMs
• Acoustical sound deadening benefits without the squeak or rattle issues of stampings
• Interior or exterior applications
• Easy installation - just peel off the release liner and adhere to the surface.

Applications:

• Fuel tank/system
• Tunnel shields
• Floor pans
• Exhaust systems
• Body shields
• Transmissions
• Steering components
• Fluid lines
• Rubber mounts
• Axle bushings