Gator G30CL Butterfly Reverse Camera

The Gator G30CL is a super compact camera that can be mounted virtually anywhere on the rear of the vehicle. It features built in parking gridlines that will help guide you when reverse parking, a wide 170 degree viewing angle that will eliminate blind spots, a sturdy aluminium case and is even IP67 rated. The camera also features a 4 pin micro din connector that allows for a clean and simple installation.

A special feature available on this camera is the LOOP SYSTEM. The camera has three wire loops on the wiring and at time of installation you can make the following adjustments by simply cutting the specific loop:

• BLUE - default setting NTSC, cut the loop for PAL.
• GREEN - default setting NO parking gridlines, cut the loop for parking gridlines.
• WHITE - default setting rear view image, cut the loop for reverse image.

The camera is PAL/NTSC switchable and is supplied with a standard RCA cable so it can be connected to any monitor or in dash AV headunit that has an RCA camera input. If you are unsure simply refer to the monitors specifications.

The camera comes supplied with 1.5m power wire and a 6m video RCA. This camera is a great option for anyone looking for a compact, high quality camera.

Features:

• Super Compact Reverse Camera
• 170 Degree Super Wide Angle
• Loop System For Adjustable Settings
• IP 67 Rated
  ** not canbus suitable **

Specs:

• Resolution: 480TV Lines
• Mount Type: Surface Mount Butterfly
• Reverse or Rear View: Switchable Reverse/Rear View
• Lens Angle: 170 Degrees
• CMOS or CCD: CMOS
• Parking Gridlines: Switchable On/Off
• PAL or NTSC: Switchable PAL/NTSC
• IP Rating: IP67
• Voltage: 12V
• Minimum Illumination: 0.2lux
• Number Of LED'S: N/A
• LED Type: N/A
• Plug Type Camera End: 4 Pin Micro Din Plug
• Plug Type Monitor End: RCA
• Length of Video Cable: 6m
• Reverse Trigger on Video Cable: Yes
• Dimensions (Camera Only):
  15mm(H) x 15mm(W) x 21mm(L)
• Dimensions (Camera & Bracket):
  25mm(H) x 38mm(W) x 30mm(L)

• Other Features: Loop System

• BLUE - default setting NTSC, cut the loop for PAL.

• GREEN - default setting NO parking gridlines, cut the loop for parking gridlines.
• WHITE - default setting rear view image, cut the loop for reverse image.