IDBBM20 Bluetooth 12V Battery Monitor Caravan 4WD RV iPhone Android APP

• Monitor multiple batteries at once via mobile app
• Bluetooth connectivity with up-to-the-second notifications
• Safe, simple protection for your battery
• Record and store historical data
• Compatible with Lead-Acid type batteries

Make monitoring your vehicle's battery a breeze with the Ultimate9 EVC (formerly iDrive Australia) Bluetooth Battery Monitor IDBBM20, replete with a host of features to make your life easier and give you the most accurate readings possible on your vehicle's battery. Designed to monitor 12V batteries fitted to your vehicle, car, SUV, motorcycle, motor home, boat, 4x4, caravan, camper, etc., the Ultimate9 EVC iDrive Bluetooth Battery Monitor IBMM20 works with lead-acid type batteries including Flooded, Sealed Lead Acid (SLA), Calcium, Absorbent Glass Mat (AGM) and GEL batteries.

Packed with smart features including a low voltage alarm, you can wirelessly monitor your batteries' condition via enabled mobile devices, and even keep tabs on multiple batteries at once with the free iOS and Android app (Ultimate9 BM2), all via BlueTooth. To find the free app, go to the Apple App Store or Android Play Store and search for Ultimate9 BM or scan the QR code on the Battery Monitor label.

The simple, cheap protection afforded by the EVC iDrive Australia 12V Bluetooth Battery Monitor IDBBM20 means you're safe from short circuits and reverse connection problems, as well as receiving up to the second notifications on the conditions of your battery via the app on your mobile device. Not only does it monitor your battery voltage, it'll also run cranking and charge tests (including a trip function) to monitor charge periods and your batteries' integrity while you're driving. Never get stuck with a dead or dying battery again!

The Ultimate9 Bluetooth Battery Monitor IDBBM20 also keeps track of your data, which is stored for up to 31 days if out of sync. You can then review and store historical data (such as trip duration) as needed.

Best of all, the installation process is quick and easy. The iDrive Australia 12V Bluetooth Battery Monitor can be installed on top of your vehicle battery - just loosen the nuts on the battery terminals, then slide the 8mm forked cable lugs under the nut and re-tighten. No need to reset radio codes or disconnect the battery!