JL Audio CP112W0-4 Ported Subwoofer 4Ω 300W With Amplifier RD500/1 Monoblock

Calculate Shipping

Description

JL Audio CP112W0-4 Single 12W0v3 Ported, 4 Ω 300 Watts RMS

Enclosed Subwoofer System with Single 12W0v3-4 Subwoofer Driver, Dark Gray Carpet (300 W, 4 Ω) – Ported Enclosure

This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value.

The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.

JL Audio RD500/1 Monoblock 1 x 500 Watts RMS

Monoblock Class D Subwoofer Amplifier, 500 W x 1 @ 2 Ω / 250 W x 1 @ 4 Ω – 14.4V

Born to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD), the RD500/1 amplifier was engineered to generate tons of pure subwoofer bliss from a sleek, ultra-compact chassis. The secret behind its power proficiency is our proprietary NexD™ switching technology, which delivers large amounts of power output with precise efficiency and ultra-low distortion.

FOCAL PK21 4AWG Performance Wiring Kit

Ready-for-use kit for installing the PERFORMANCE power amplifiers range. Complete kit including the power cable, but also the speaker cable.

Remote Bass Control for Select JL Audio Amplifiers

The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers: JX-Series: JX250/1, JX500/1, JX500/1D, JX1000/1D HX-Series: HX300/1 in Low Pass Mode (Note: M-RBC-1 is also available) MHX-Series: MHX300/1 in Low Pass Mode (Note: M-RBC-1 is also available) When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

(CP112W0-4_RD5001)

Sale