JL Audio CS110TG-TW3 Sealed 10" Subwoofer 2 Ω 400W With Amplifier RD500/1 Monoblock

JL Audio CS110TG-TW3 Sealed 10TW3, 2 Ω 400 Watts RMS

Enclosed Subwoofer System with Single 10TW3-D4 Subwoofer Driver, Black Carpet (400 W, 2 Ω) – Sealed Enclosure

In this sealed Truck PowerWedge™ subwoofer system, we harness the performance of the 10TW3 to deliver amazing sub-bass from an enclosure that is only 6.25 in. (159 mm) deep at its base and 4.1 in. (104 mm) at the top.

This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW3 and has been fine-tuned through extensive real-world listening.

This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.

JL Audio RD500/1 Monoblock 1 x 500 Watts RMS

FOCAL PK21 4AWG Performance Wiring Kit

Ready-for-use kit for installing the PERFORMANCE power amplifiers range. Complete kit including the power cable, but also the speaker cable.

Remote Bass Control for Select JL Audio Amplifiers

The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers: JX-Series: JX250/1, JX500/1, JX500/1D, JX1000/1D HX-Series: HX300/1 in Low Pass Mode (Note: M-RBC-1 is also available) MHX-Series: MHX300/1 in Low Pass Mode (Note: M-RBC-1 is also available) When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.