JL Audio CS112TG-TW3 Sealed 12" Subwoofer 2 Ω 400W With Amplifier RD500/1 Monoblock

Calculate Shipping

Description

Enclosed Subwoofer System with Single 12TW3-D4 Subwoofer, Black Carpet (400 W, 2 Ω) - Sealed Enclosure

In this sealed Truck PowerWedge™ subwoofer system, we harness the performance of the 12TW3 to deliver amazing sub-bass from an enclosure that is only 7 in. (178 mm) deep at its base and 4.5 in. (114 mm) at the top.

This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12TW3 and has been fine-tuned through extensive real-world listening.

This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.

JL Audio RD500/1 Monoblock 1 x 500 Watts RMS

Monoblock Class D Subwoofer Amplifier, 500 W x 1 @ 2 Ω / 250 W x 1 @ 4 Ω – 14.4V

Born to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD), the RD500/1 amplifier was engineered to generate tons of pure subwoofer bliss from a sleek, ultra-compact chassis. The secret behind its power proficiency is our proprietary NexD™ switching technology, which delivers large amounts of power output with precise efficiency and ultra-low distortion.

FOCAL PK21 4AWG Performance Wiring Kit

Ready-for-use kit for installing the PERFORMANCE power amplifiers range. Complete kit including the power cable, but also the speaker cable.

Remote Bass Control for Select JL Audio Amplifiers

The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers: JX-Series: JX250/1, JX500/1, JX500/1D, JX1000/1D HX-Series: HX300/1 in Low Pass Mode (Note: M-RBC-1 is also available) MHX-Series: MHX300/1 in Low Pass Mode (Note: M-RBC-1 is also available) When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

(CS112TG-TW3_RD5001)

Sale