JL Audio RD1000/1 Class-D Mono Amplifier 1000W RMS

The Monoblock RD1000/1 is capable of pushing out up to 1,000 watts of clean power at 2 ohms, this subwoofer amplifier handily powers all the low end you can stand. The RD Monoblocks have built-in 12 dB/octave low-pass filters, bass equalizer boosters and three turn-on modes: Traditional 12-volt trigger, signal sensing and DC offset. Top off the package with a sleek, single-cast piece of aluminum in black powdercoat and blue LEDs, and your power looks as clean as it sounds.

All of the inputs and controls are on the same side of the chassis, simplifying the setup whether you’re in a shop or in your driveway. The output clipping indicators on each channel section mean you don’t need specialized tools to accurately set the gain. A remote level control input gives you the option to install a bass level knob, sold separately, in the front seat, giving you full control over the bass output for every song you play.

NexD™ Switching Technology

The RD Series also incorporates JL Audio’s NexD Switching Tehnology. Since Class D amplifiers have a tendency to produce distortion at some ranges, NexD Switching helps cancel it out before feedback is ever applied. All of this helps ensure the some of the cleanest possible signal to your subwoofer from your brand new Class D amplifier.

Features:

• JL Audio RD-Series RD1000/1
• Class-D Monoblock Amplifier
• RMS Power Rating:
  • 4 ohms: 500 watts x 1 chan.
  • 2 ohms: 1000 watts x 1 chan.
  • 1 ohm: ------------N/A------------
• Total power output: 2000 watts
• Differential-Balanced Inputs
• Speaker-level (high-level) inputs: Additional items Required, sold separately
• NexD™ Technology delivers outstanding sound quality, efficiency and reliability
• LED clipping indicators
• Pulse Width Modulated MOSFET power supply
• LED power (green) and protect (red) indicators
• Soft start turn-on
• Mono channel operation
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Total Harmonic Distortion (THD): <1%
• Variable low-pass filter: 50 - 500 Hz, 12 dB/octave
• Low-Pass Slope (dB/octave): 12 dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz
• Fuse Rating: 80 A x 1
• 4 gauge power and ground wiring is recommended for installation. 
• Dimensions: 7"W x 14-11/16"L x 2-3/16"H