Rockford Fosgate P1000X5 1,000 Watt Class-BD 5-Channel Amplifier
SKU:P1000X5
1,000 Watt Class-BD 5-Channel Amplifier
The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer.
- High level input capable with Auto Turn-On circuit
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz.
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Infrasonic filter
- 2/4 channel input switch
P1000X5
The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known world-wide for brute power, this amplifier offers a higher level of efficiency along with a tri-stage protection that covers thermal, over-current and short circuits.
CEA-2006 Compliant: | CEA-2006 Power Rating 75Wx4 + 150Wx1 @ 4Ω ≤1.0% THD+N |
Number of Channels: | 5 |
Rated Power (RMS Continuous Power): |
75 Watts x 4 + 150 Watts x 1 @ 4-Ohm 125 Watts x 4 + 300 Watts x 1 @ 2-Ohm N/A + 500 Watts @ 1-Ohm |
Total Power (Sum of Rated Power): |
1000 Watts |
Dynamic Power (PVC/PowerCube®): |
115 Watts x 4 + 299 Watts x 1 @ 4-Ohms 0° Res 190 Watts x 4 + 540 Watts x 1 @ 2-Ohms 0° Res N/A + 863 Watts x 1 @ 1-Ohm 0° Res |
Bridgeable: | Yes (front/rear channels) |
Frequency Response: | Front/Rear: 20Hz - 20kHz +/-3dB Sub: 20Hz - 500Hz +/-3dB |
Efficiency (average): | Front/Rear: 66% @ 4-Ohm Sub Channel: 80% @ 4-Ohm |
Total Harmonic Distortion (THD+Noise): | <1.0% |
Crossover Controls: | Front: 50Hz - 250Hz High-Pass @ 12dB/Octave Rear: 50Hz - 250Hz High-Pass @ 12dB/Octave Sub: 50Hz - 250Hz Low-Pass Sub: 28Hz infrasonic filter @ 12dB/Octave |
Tone Controls: | Sub: 0dB to +18dB @ 45Hz |
Input Sensitivity: | 150 mV - 12 V |
Signal Input: | Input Switch: Hi/Low level input Input Switch: 2/4 channel input Hi/Low Level: 3 RCA Pair Sub: front/sub input switch |
Signal Output: | - |
Power Input Connector: | Block |
Power Wire Gauge: | 4 AWG |
Speaker Output Connector: | Block |
Speaker Wire Gauge: | 12 AWG |
Heat Sink Type: | Cast |
Cooling: | Convection |
Remote Controls: | Optional Punch Level Control (PLC2) Ready |
Visual Indicators: | Power/Protect/Thermal LED Input Clip LED Output Clip LED |
Circuit Topology Class: | Front/Rear: Class-A/B Sub: Class-BD |
Operating Voltage: | 9 - 16 VDC |
Recommended Fuse (not included): |
150 A |
Max. Current Draw (13.8V Sinewave): | 150 A |
Average Current Draw (13.8V Music): | 75 A |
Suggested Alternator: | 100 A |
Shipping Weight: | 15.3 Lbs. (6.93 Kg.) |
Dimensions (HxWxL): | 2.38 x 7.76 x 15.03 (in) 6.05 x 19.71 x 38.18 (cm) |
Dimensional Diagram: |
(P1000X5)