Rockford 10” Subwoofer & Alpine Amplifier kit

Rockford Fosgate P3S-1X10 Single P3 10" Shallow Loaded Enclosure

• The P3S-1X10 is a single 1” Punch Shallow subwoofer rated at 300 Watts RMS loaded in a sealed enclosure. This subwoofer enclosure is internally wired to a 1-Ohm load and features 5/8” MDF and 10 AWG quick-release input terminals.

Alpine S2-A60M Digital Mono Amplifier

• The next generation S-Series S2-A60M mono subwoofer amplifier makes it a lot easier to get great bass in your vehicle, delivering up to 600 Watts RMS power @ 2 Ohms. A variable bass boost allows you to dial in some extra punch and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat.

  A built-in low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.

Alpine RUX-KNOB.2 Remote Bass Controller

• The optional RUX-KNOB.2 remote bass control knob plugs right in to mono amplifier models for quick, direct subwoofer control to make bass adjustments on the fly.