Thinkware U1000 4K UHD Dash Cam 128GB U4K128

In the event of a crash, the alert feature can help the driver to notify others of an emergency situation when the driver is not in the condition to do so. The family or the owner of the car can then remotely check on the situation from their location.

When the car experiences an impact with a g-force level greater than 3g or 4g while driving, the dash cam will automatically send a push notification alert of the impact to the user’s smartphone logged in to the THINKWARE CLOUD app.

A 20 seconds video of the incident (10 seconds before and after the incident) is also saved on the THINKWARE CLOUD server, and a push notification alert of the video is sent to the user, which can be checked later and downloaded from the app.

Geo-Fencing

Geo-Fencing allows drivers to stay alert of the vehicle location. Whether your vehicle goes in/outside of a certain radical area, U1000 will send you a push notification through the mobile app. This is more practical for the parents, rental companies, and for fleet management.

The radius can be set by typing the address or by using pinpoint on the mobile app. You may set 20 different areas sizes ranging from 100m to 600km.

Locate Vehicle

Locate Vehicle will help drivers to find the vehicle’s current location. U1000 will update its current location in every 10 seconds. Then it will display current location with speed and the heading direction integrated on google map.

Safety Camera Alert

The THINKWARE DASH CAM U1000’s internal GPS provides accurate location information while the Safety Camera Alert function is on continuous alert to warn the driver of red lights and traffic enforcement cameras.

Front view recordings

The U1000’s Image Sensors allow constant front 4K UHD resolution recording during both daytime and nighttime along with a 150-degree wide angle lens view. This will minimize blind spots to assure recording of all events without fail.

Super Night Vision 2.0

videos recorded in a low-light environment, such as dark alleys or parking lots, may not be clearly identifiable.

SUPER NIGHT VISION 2.0 in the U1000 uses Image Signal Processing (ISP) technology to record a clear, visible video in any situation- while driving or parked.

Wide Dynamic Range

When you are driving under bright sunlight, coming out of a tunnel, or getting under the shadow of a tall building etc, a sudden change in frontal light exposure levels can result in excessively bright or dark recordings.

The WDR function eliminates excessively bright spots on the recording to correct its colour balance in order to ensure a clear image.

Automatic Exposure

A sudden rise of light exposure caused by strong sunlight or headlight beams of the oncoming vehicle may cause difficulties to assess the situation. Also, the lack of lighting in a dark tunnel or night driving may pose the same problem.

The automatic light exposure function controls the level of light exposure to maintain vivid and clear video recordings in all circumstances.

Various Autonomous Recording Modes

Continuous Recording Mode

This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.

Incident Recording Mode

The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.

Manual Recording Mode

Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.

Energy Saving Mode

The dash cam will go to sleep and soon after an impact has been detection by built-in G-senor, U1000 will wake up within a second and start recording for next 20 seconds of the period.